Skip to main content

EIA: ethanol and biodiesel rail movements

Published by , Editor - Hydrocarbon Engineering
Tanks and Terminals,


EIA recently released new information on ethanol and biodiesel movements by rail. The new monthly estimates are integrated with EIA's existing Petroleum Supply Monthly and include movements beginning in January 2014. Unlike other liquid fuels that are most commonly transported by pipeline, ethanol and biodiesel are more often transported by rail because both fuels attract water and other impurities in pipelines.

The estimates cover rail movements of ethanol and biodiesel within each Petroleum Administration for Defense District (intra-PADD) and between different PADDs (inter-PADD), as well as rail movements to and from Canada. The estimates improve EIA's regional supply and disposition balances by providing information about both the shipments and receipts of ethanol and biodiesel by rail. Previously, only information on imputed net receipts was available.

Origins, destinations, and volumes of ethanol and biodiesel shipped by rail have not experienced much change over the past two years. Almost all ethanol and biodiesel end up in the motor gasoline or diesel pool, respectively. The only other outlet for fuel ethanol or biodiesel is exports, which are small compared with domestic consumption.

In 2015, the ethanol share of gasoline was 9.9%, and the biodiesel share of distillate was 2.4%. Most ethanol and biodiesel is produced in the Midwest (PADD 2), where it is then shipped to other regions. In 2015, the Midwest shipped 593 000 bpd of ethanol by rail and 16 000 bpd of biodiesel by rail. The East Coast (PADD 1) receives almost half of the ethanol moved by rail. Biodiesel by rail receipts are about the same in all regions except the Mountain region (PADD 4).


Adapted from press release by Rosalie Starling

Read the article online at: https://www.tanksterminals.com/storage-tanks/08042016/eia-ethanol-and-biodiesel-rail-movements-2980/

You might also like

 
 

Embed article link: (copy the HTML code below):